galvastop® - Now Made in the USA!

Galvastop® is an easy to use paint-on masking product for Hot Dip Galvanizing that goes through all pretreatments and comes out of the kettle as an ash that is simply wire brushed off. Unwanted zinc sticks to the Galvastop® and not the steel, allowing you to easily remove both. No grinding or retapping required.


GALVASTOP® RED

Our new formula was designed to provide an economical masking product that can be used on most projects. Ideal for flat surfaces, Galvastop® Red paints on with a standard natural brush onto a clean, oil free steel surface. Once dry, it is ready for galvanizing. Just wire brush off once fully galvanized.

Our new formula provides the same performance of our original imported Galvastop® at a significantly more affordable price! We took the savings from manufacturing Galvastop® in the USA and are passing it on to you.

Count
1 1 Liter Bottle (A little more then a quart) $40
9 Case of 9 1 Liter Bottles (2.4 Gallons) $315.00 ($35.00 per liter)
1 25 liter barrel (6.6 Gallons) $525.00 ($21.00 per liter)

Galvastop® Info Sheet PDF


Note: Galvastop® can only be shipped via Ground due to Haz-Mat regulations.


GALVASTOP® GOLD

Galvastop® Gold is our new high-tack formula ideal for use on curved parts, threads and blind holes. This product has stronger adhesive properties than our standard Galvastop® Red and has a shorter cure time. Just like our standard Galvastop® Red, Galvastop® Gold is applied onto clean, oil free steel using a natural brush and is easily removed with a wire brush after the completed galvanizing process.

* A syringe can be used to apply the Galvastop® into internal threads and blind holes.

Count
1 1 Liter Bottle (A little more then a quart) $45
9 Case of 9 1 Liter Bottles (2.4 Gallons) $360.00 ($40.00 per liter)
1 25 liter barrel (6.6 Gallons) $600.00 ($24.00 per liter)


Note: Galvastop® can only be shipped via Ground due to Haz-Mat regulations.


TESTIMONIALS

We have received and used the sample of the Gold.
We have our first scale that we used this on, back to us yesterday and we like the results.
The cleanup after Galvanizing is minimal and we are VERY satisfied with this gold formula.
Between the two formulas we are pleased with the results and wish to add you as a supplier for our galv. Prep needs.
We have cut our prep time significantly for a standard 70 foot truck scale from about 120 min to less than 30 min.
In turn our clean out and prep for assembly and install time has dropped from about 6 hours to less than 30 min as well.
Thanks for your help with this.

Brent W. Kauser
Mettler-Toledo, LLC.